Bug fixes and performance improvements
Minor improvements in the user interface
Bug fixes and performance improvements
Bug fixes and performance improvements
Bug fixes and performance improvements
Bug fixes and performance improvements
Fix: Do not show GDPR dialog to subscribers
Bug fixes and performance improvements
Added cutting type images to PDF.
Fixed ANR when starting to optimize.
Other minor improvements.
[Premium Feature]
Cut type.
Premium users can choose the type of cut for each piece and it will also be shown in the optimization list
Added cutting type images to PDF.
Fixed ANR when starting to optimize.
Other minor improvements.
[Premium Feature]
Cut type.
Premium users can choose the type of cut for each piece and it will also be shown in the optimization list
Bug fixes and performance improvements
Bug fixes and performance improvements
Bug fixes and performance improvements
Screen rotation improvements: The device's screen rotation settings will now be respected.
Screen rotation improvements: The device's screen rotation settings will now be respected.
Set a custom logo and texts on the PDF (premium users only).
Other minor improvements.
Bug fixes and performance improvements
Bug fixes and performance improvements
Bug fixes and performance improvements
Bug fixes and performance improvements
-New optimization engine
Get better results with the new optimization engine.
Despite being experimental, it is enabled by default due to the good results obtained.
You can disable it at any time from the configuration screen, although in the near future it will be included along with the rest of the engines.
Other improvements in the use of bars and minimize waste.
-Special thanks to Жорик Батарейкин for all the help provided.
Bug fixes and performance improvements
Bug fixes and performance improvements
Bug fixes and performance improvements
Set default page size to A4 on printer / PDF
Removed all Firebase dependencies.
Minor bugs fixed.
Added support for not losing crossed out measurements when rotating the device
Multiple other improvements
Fixed bug when deleting measures
Fixed crash due to saved preferences
Fix import from txt
Bug fixes and performance improvements
· Now the app remembers all the app data between reopens (configuration, lists, etc).
· Added indicator of remnants available on the button.
· The Reset menu now resets the entire app (except manually saved lists).
· Fixed other minor bugs.
Fixed import from txt using decimals.
Other minor bug fixes.
Bug fixes and performance improvements
Subscription support.
From now on you can subscribe to remove all ads from the app.
Version 4.3
Enhanced PDF files:
Now the PDFs will show in a much clearer way every detail of the optimization and breakdown of materials.
New visual sections with bar simulation for better control.
Removed unnecessary permissions.
Other minor improvements.
Bug fixes and other minor improvements.
Added support for updating saved lists.
Added support for updating saved lists.
Added support for updating saved lists.
Added design for 7 and 10 inch tablets.
Aggiunta traduzione in italiano.
Per favore, se trovi degli errori, contattami
Version 4.1
·Grouping of bars and pieces optional
·If you choose not to group, then it is now possible to cross out piece by piece
Version 4.0
·New interface.
·Completely rebuilt optimization engine from scratch.
·New support to print and / or generate PDF of the optimization on compatible devices.
·New card-based settings screen.
·Grouping of elements by type on cards for a clearer and more complete configuration.
Complete changelog: https://telegra.ph/Cutter-v40-05-26
Version 4.1
·Grouping of bars and pieces optional
·If you choose not to group, then it is now possible to cross out piece by piece
Version 4.0
·New interface.
·Completely rebuilt optimization engine from scratch.
·New support to print and / or generate PDF of the optimization on compatible devices.
·New card-based settings screen.
·Grouping of elements by type on cards for a clearer and more complete configuration.
Complete changelog: https://telegra.ph/Cutter-v40-05-26
Version 4.1
·Grouping of bars and pieces optional
·If you choose not to group, then it is now possible to cross out piece by piece
Version 4.0
·New interface.
·Completely rebuilt optimization engine from scratch.
·New support to print and / or generate PDF of the optimization on compatible devices.
·New card-based settings screen.
·Grouping of elements by type on cards for a clearer and more complete configuration.
Complete changelog: https://telegra.ph/Cutter-v40-05-26
Version 4.1
·Grouping of bars and pieces optional
·If you choose not to group, then it is now possible to cross out piece by piece
Version 4.0
·New interface.
·Completely rebuilt optimization engine from scratch.
·New support to print and / or generate PDF of the optimization on compatible devices.
·New card-based settings screen.
·Grouping of elements by type on cards for a clearer and more complete configuration.
Complete changelog: https://telegra.ph/Cutter-v40-05-26
Version 4.1
·Grouping of bars and pieces optional
·If you choose not to group, then it is now possible to cross out piece by piece
Version 4.0
·New interface.
·Completely rebuilt optimization engine from scratch.
·New support to print and / or generate PDF of the optimization on compatible devices.
·New card-based settings screen.
·Grouping of elements by type on cards for a clearer and more complete configuration.
Complete changelog: https://telegra.ph/Cutter-v40-05-26
Bug fixes.
Bug fixes.
Bug fixes.
Visual enhancements
Bug fixes.
Bug fixes.
Russian translation added (Thank you very much, Александр Маслов!)
Bug fixes.
Russian translation added (Thank you very much, Александр Маслов!)
Bug fixes.
Russian translation added (Thank you very much, Александр Маслов!)
Bug fixes.
Fix PDF generation on Android 10.
The breakdown of materials is now also included in the optimization PDF.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes.
Added optional setting for disc tilt.
The actual disk width will now be calculated depending on the degrees of disk inclination.
Fixed some errors in the calculation of waste.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes.
New animations.
New shortcut to your saved lists.
Other improvements.
Bug fixes.
· Improved design
· Improved optimizer.
· New configuration type selector:
[·] Simple Mode: The usual mode.
[·] Advanced Mode: Allows the use of multiple stock measurements, the optimizer will be responsible for choosing the optimal stock bar size for each cut.
For now, this mode only supports measurements with decimal numbers. In the future it will also admit fractional inches measurements.
· Multiple bug fixes and other improvements.
· Improved design
· Improved optimizer.
· New configuration type selector:
[·] Simple Mode: The usual mode.
[·] Advanced Mode: Allows the use of multiple stock measurements, the optimizer will be responsible for choosing the optimal stock bar size for each cut.
For now, this mode only supports measurements with decimal numbers. In the future it will also admit fractional inches measurements.
· Multiple bug fixes and other improvements.
· Improved design
· Improved optimizer.
· New configuration type selector:
[·] Simple Mode: The usual mode.
[·] Advanced Mode: Allows the use of multiple stock measurements, the optimizer will be responsible for choosing the optimal stock bar size for each cut.
For now, this mode only supports measurements with decimal numbers. In the future it will also admit fractional inches measurements.
· Multiple bug fixes and other improvements.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes.
Update required for compliance with the GRPD.
Now the screen stays on while the optimization is displayed.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes.
Added button to cancel the optimization process.
Bug fixes and performance improvements.
Added button to cancel the optimization process.
Bug fixes and performance improvements.
Export optimization to PDF: Now you can export the optimization to a PDF file by pressing the new button (API 21+).
Bug fixes loading lists from text files.
Added permission to write PDF to disk: WRITE_EXTERNAL_STORAGE
Resolved memory leaks in the enhanced mode.
The enhanced mode is now less aggressive.
Solution of errors in the codification characters of the imported text files.
Bug fixes.
Bug fixes.
Improved transitionsAdded option to save the individual cut settings for each project.Added option to save the scrap list.
Added option to save the scrap list.
Added option to save the scrap list.
Added option to save the scrap list.
Visual improvements.
Fixed: Empty lines when using enhanced mode.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes.
Bug fixes and improvements in fractional inch usage.
Bug fixes and improvements in fractional inch usage.
Bug fixes and improvements in fractional inch usage.
Bug fixes and improvements in fractional inch usage.
Troubleshooting errors in the activity stack.Other improvements.
Troubleshooting errors in the activity stack.Other improvements.
New optimization algorithm.With the new algorithm you will get more precise results and a notable reduction of waste and bars required.This new algorithm uses a very exhaustive way to improve results, and consequently, is much slower than normal mode.To use it, it is available in the menu of the section "Measurement list".Its use is optional.At the moment not available for use in Fractional Inches.Other improvements and bug fixes.
Cutter is a totally free tool dedicated to optimizing cutlists automatically.
Its
easy, simple and intuitive design makes Cutter the best tool designed for the professional field, from small to large companies.
Oriented mainly to metal carpentry (aluminum, PVC...), with this software you can optimize your material cutting lists by adjusting the maximum use of the bars (linear cutting).
Very fast optimization process: Get optimization of thousands of measurements in seconds.
Use an intelligent algorithm that will carry out the
optimization, organization and distribution tasks of the different measures in the best possible way.
You must always enter the total measurement of each piece (from exterior to exterior).
Fully customized cutting configuration. Save measurement lists with custom names.
Retrieve lists directly from the saved lists menu or
import your own txt file.
Use your own scraps to include in the optimization, useful to take advantage of leftover pieces that you have available.
The initial settings will be stored automatically and you will not need to enter the data again.
At any time you can reset the values from Menu -> Reset.
You can delete any measurement at any time using a long press on it.
You can delete the list of measurements from a button.
You can undo accidental deletions.
The cutting optimization will be shown grouped in the number of bars whose cuts are identical, being able to mark each element of the list (using a long press) to control at all times which material has been cut.
In turn, a graphic element will be shown simulating the scale bar with the cut used and the excess scrap.
The top part will show the number of total bars needed and the number of total pieces, useful if we need to know previously how many bars we need to order from the factory or for any other reason.
In case of error, you will be notified so that you can review the list of measures.
Share the optimization of the material through your usual messaging client (Telegram, Skype ...) or simply paste it into your favorite notes application.
Print or export in a PDF file your optimizations and add a custom logo if you wish.
The application supports decimals. To avoid errors it is recommended to use the Google Keyboard:
https://play.google.com/store/apps/details?id=com.google.android.inputmethod.latin For any questions or suggestions, write me an email at
soldierdeveloper@gmail.com or via Telegram at
https://t.me/SoldierFC