In this new version of HyTune, the eR&D unit of IMI Hydronic Engineering delivers you:
1. The configuration of new Fail-Safe models of TA-Slider. This includes setting of parameters such as fail-safe position, delays and allows checking the fail-safe health level.
2. The reading of serial number and firmware version of the new versions of TA-Slider 160 KNX and KNX R24. Configuration of these actuators needs to be performed with KNX ETS software.
Stay connected for further improvements.
In this new version of HyTune, the eR&D unit of IMI Hydronic Engineering delivers you:
1. The configuration of new Fail-Safe models of TA-Slider. This includes setting of parameters such as fail-safe position, delays and allows checking the fail-safe health level.
2. The reading of serial number and firmware version of the new versions of TA-Slider 160 KNX and KNX R24. Configuration of these actuators needs to be performed with KNX ETS software.
Stay connected for further improvements.
Continuing to implement your wishes, the eR&D unit of IMI Hydronic Engineering delivers you:
1. A very unique live graphical view of the input signal over time.
2. A "Delayed startup" option applicable after a power cut.
3. A "Flushing" action to trigger with binary input.
4. Additional dual-range signals for change-over.
5. Options for Pt1000 sensors (for TA-Slider 160/500 BACnet/Modbus).
Stay connected for further improvements.
Continuing to implement your wishes, the eR&D unit of IMI Hydronic Engineering delivers you:
1. A very unique live graphical view of the input signal over time.
2. A "Delayed startup" option applicable after a power cut.
3. A "Flushing" action to trigger with binary input.
4. Additional dual-range signals for change-over.
5. Options for Pt1000 sensors (for TA-Slider 160/500 BACnet/Modbus).
Stay connected for further improvements.
Continuing to implement your wishes, the eR&D unit of IMI Hydronic Engineering delivers you:
1. A very unique live graphical view of the input signal over time.
2. A "Delayed startup" option applicable after a power cut.
3. A "Flushing" action to trigger with binary input.
4. Additional dual-range signals for change-over.
5. Options for Pt1000 sensors (for TA-Slider 160/500 BACnet/Modbus).
Stay connected for further improvements.
Continuing to implement your wishes, the eR&D unit of IMI Hydronic Engineering delivers you:
1. A very unique live graphical view of the input signal over time.
2. A "Delayed startup" option applicable after a power cut.
3. A "Flushing" action to trigger with binary input.
4. Additional dual-range signals for change-over.
5. Options for Pt1000 sensors (for TA-Slider 160/500 BACnet/Modbus).
Stay connected for further improvements.
Continuing to implement your wishes, the eR&D unit of IMI Hydronic Engineering delivers you:
1. A very unique live graphical view of the input signal over time.
2. A "Delayed startup" option applicable after a power cut.
3. A "Flushing" action to trigger with binary input.
4. Additional dual-range signals for change-over.
5. Options for Pt1000 sensors (for TA-Slider 160/500 BACnet/Modbus).
Stay connected for further improvements.
Continuing to implement your wishes, the eR&D unit of IMI Hydronic Engineering delivers you:
1. A very unique live graphical view of the input signal over time.
2. A "Delayed startup" option applicable after a power cut.
3. A "Flushing" action to trigger with binary input.
4. Additional dual-range signals for change-over.
5. Options for Pt1000 sensors (for TA-Slider 160/500 BACnet/Modbus).
Stay connected for further improvements.
Continuing to implement your wishes, the eR&D unit of IMI Hydronic Engineering delivers you:
1. A very unique live graphical view of the input signal over time.
2. A "Delayed startup" option applicable after a power cut.
3. A "Flushing" action to trigger with binary input.
4. Additional dual-range signals for change-over.
5. Options for Pt1000 sensors (for TA-Slider 160/500 BACnet/Modbus).
Stay connected for further improvements.
You asked, we listened. The eR&D unit of IMI Hydronic Engineering is glad to deliver you HyTune 1.5.0 that provides pdf export of a report with all configuration parameters of a TA-Slider actuator as well as the possibility to rename your stored configurations and to organise them in folders.
Stay connected for further improvements.
You asked, we listened. The eR&D unit of IMI Hydronic Engineering is glad to deliver you HyTune 1.5.0 that provides pdf export of a report with all configuration parameters of a TA-Slider actuator as well as the possibility to rename your stored configurations and to organise them in folders.
Stay connected for further improvements.
NEW IN VERSION 1.4.14
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.12
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.11
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.10
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.9
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.8
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.4
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.3
* New actuators TA-Slider 160 CO for change-over and TA-Slider 160 & 500 BACnet/Modbus
* New feature that allows to set a minimum stroke below which the TA-Slider will not go
* Enhanced stability of BLE communication with TA-Dongle
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.2
* New actuators TA-Slider 160 CO for change-over and TA-Slider 160 & 500 BACnet/Modbus
* New feature that allows to set a minimum stroke below which the TA-Slider will not go
* Enhanced stability of BLE communication with TA-Dongle
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.4.0
* New actuators TA-Slider 160 CO for change-over and TA-Slider 160 & 500 BACnet/Modbus
* New feature that allows to set a minimum stroke below which the TA-Slider will not go
* Enhanced stability of BLE communication with TA-Dongle
* Lots of small enhancements and bug fixes
NEW IN VERSION 1.3.2
* Minor bug fixes
* Sharing of actuator configurations.* Option for led deactivation if led blinking is a distraction in an occupied room.* New pressure-independent control valves TA-Fusion-P DN150 HF and KTM50 DN200 HF.
* TA-Modulator – new range of pressure-independent control valves (DN40 - DN80)* Minor bug fixes
IMI Hydronic Engineering proudly presents HyTune, the user-friendly actuator configuration App for the TA-Slider range of actuators.
Features include:
* Easy adjustment of the parameters of TA-Slider actuators:
- Input signal,
- Output signal,
- Stroke limitation,
- Speed,
- Binary input and relay programming,
- And more …
* History of last errors and operational statistics
* Direct override of actuator's position
* Export to pdf of all configuration parameters of a TA-Slider actuator
* Live graphical view of the input signal received by the actuator over time
HyTune 1.5.0 and later requires Android 5 or later
Please visit www.imi-hydronic.com for more information and contact details.
Phone numbers to local support can be found here: http://www.imi-hydronic.com/en/contact/
IMI Hydronic Engineering is the leading global provider and expert in hydronic distribution systems and room temperature control, with experience in more than 100,000 projects worldwide. We help our customers everywhere optimise HVAC systems so they deliver desired comfort with optimal efficiency. IMI Hydronic Engineering is part of the international engineering group IMI plc which is listed as a member of the FTSE 250 on the London Stock Exchange.